Category: Cars

It’s all about Cars

  • MINI Cooper Auxiliary Serpentine Fan Belt Change (Replacement Without Special Tools)

    This is a tutorial to replace a Mini Cooper auxiliary belt, serpentine belt, or some people call it fan belt. In this article ill be sharing the method I use to change the auxiliary belt without using special tool. The car I am working on is a 2005 Mini Cooper R50 where the production runs from 2001 to 2008 depending on the country you are living. Let’s get the work started!

    Step 1: Remove the front wheel (Driver’s side for right hand drive country)

    Step 2: Remove the Wheel Well Liner

    There are a total number of 10 bolts holding the wheel well liner, remove 9 is enough as we don’t need to remove the wheel well liner entirely. There is 1 more on top which is not shown in the image.

    Just push the wheel well liner aside and now you can access the pulley and also the auxiliary belt, serpentine belt, fan belt or whatever you call it.

    Step 3: Remove the Solenoid

    It is a must to remove the solenoid in order to access the belt. There are three things connected to the solenoid, one electric socket with cables, and two hoses. Remove these three and you can simply slide (towards LEFT) to remove it. In my case the earth cable is blocking it so I removed the earth cable as well. A solenoid is a device that converts electrical energy to mechanical energy, so please handle with care. The image below shows the location of the solenoid.

    Step 4: Push the Belt Tensioner without Special Tools

    In order the make the work easier, many people use a special-made belt tensioner tool for the Mini Cooper. It fits the belt tensioner perfectly just like the photo below.

    As I do not have the belt tensioner tool like the photo shown above. I simply use a steel pipe together with a hydraulic jack placed on the floor. All you have to do is to place the steel pipe below the belt tensioner and then jack it up. This is how I deal with it.

    Some people use a Pry Bar instead of special tools that made for Mini Cooper. However, this method works perfectly for me. I found it is one of the easiest way to do it. All you have to do is remove the plastic dust cover underneath if it blocks your way. Once you push the belt tensioner high enough, slot a T27 allen key to hold the belt tensioner. Just like the image show below.

    Step 5: Remove the Auxiliary Belt or Serpentine Belt or Fan Belt

    Now you can remove the auxiliary belt easily as it has been loosen. In my case I don’t have to because it was broken when I was driving.

    Step 6: Replace a new Auxiliary Belt

    The original auxiliary belt (serpentine belt or fan belt) on a first generation Mini Cooper with Air Conditioning is 6PK 1033. It is 1033 mm long with 6 lines. I replaced mine with a HUTCHINSON brand 6PK 1030. I was told that +3mm or -3mm doesn’t matter on the car. I managed to fit the fan belt in and it works fine.

    Now the auxiliary belt is fitted to the car, it should go through Alternator, Air Condition Compressor, power steering pump, and a pulley. It is not tight yet until you use the same method to put the belt tensioner back.

    Now put back the solenoid, wheel well liner, the underneath plastic dust cover, and also the wheel. The job is done! It took me about 2 hours to get this job done.

    When Should You Replace Your Auxiliary Belt or Serpentine Belt or Fan Belt?

    The Mini Cooper Owner’s Manual suggest to replace your auxiliary belt every 50,000 to 100,000 miles or around five years. My car mileage was 73000 miles, the belt was 18 years and it broke. Therefore, please check your belt from time to time. Rubber deterioration can occur faster than you can imagine especially when the weather is always changing. That’s all for today’s article, share this post out if it helps you. Thank you for reading!

    Read These for Mini Cooper DIY Repair:

    Replacing Rear Shock Absorber Bushes on a Mini Cooper R50

  • Driving a Malaysian🇲🇾 Car to Vietnam🇻🇳 via Laos🇱🇦 and Thailand🇹🇭

    Driving a Malaysian🇲🇾 car to Vietnam🇻🇳 via Thailand🇹🇭 Cambodia🇰🇭 and Laos🇱🇦 has always been my dream. While I was planning my trip, I realised there is not much of information available online. I believed there are many Malaysian or Singaporean motorist would like to do this too. So I hope this article will be useful for anyone who love overland journey in ASEAN countries.

    I started my journey in February 2023, using a 23-year-old JDM Toyota Altezza with 1JZ-GTE vvti engine. It’s all started from Georgetown, Penang. The first border crossing was done at Bukit Kayu Hitam-Sadao, it was smooth and easy because Songkhla province in Thailand has get used to deal with Malaysian car. I drove all the way up to Bangkok, Pattaya and then went to a border between Thailand and Cambodia, this is where my dream was broken. I was rejected to enter the Cambodia because of my car is RHD Right Hand Drive. I went back to Pattaya and stayed a couple days. Enjoyed the beautiful scene and cool breeze on the beaches there.

    While I was in Pattaya, I contacted Laos and Vietnam embassy to see whether I could get some sort of advance permit, something like “passport or visa for the car”. I find no one is able to give me an answer whether my car would be allowed entry into Laos or Vietnam. This is because Malaysia and Laos or Malaysia and Vietnam do not share a land border and are separated by 2,000-3000+ KM of Thailand. After having enough rest, I decided to give it a try. I changed my route to Khao Yai, Nakhon Ratchasima, Korat, Mukdahan and enter to Laos🇱🇦 via the second Thai-Lao Friendship bridge. Some people suggest me not to use the bridge because the risk of being denied is high. Life is simple, you made choices, you don’t look back, I just go with my plan.

    Malaysian Car Arrived at Laos Border

    Here’s the process to drive a Malaysian car into Laos via Thailand:

    Leaving Thailand:

    1. Parked my car at left hand side together with cars leaving Thailand.
    2. Bring my passport and went to Booth No 5. They stamped my passport and I am ready to leave, but not my car.
    3. Submit my car registration card (Geran) and “Simplified Customs Registration Form” to the next Booth. The first officer who took my documents rejected me. He said I couldn’t leave this check point and enter Laos with my car. He wasn’t wrong but I am not someone give up on things easily. So I brought all my documents and went into the immigration office to talk to a “Supervisor”. The friendly Supervisor said they have never seen any Malaysian car here and I was the first one. She was surprised and don’t know what to do too. She then called her “Hua Na” (Perhaps is her Manager) and reported my case to him. After more discussion with manager, she came back to me and said they granted me the permission to go upon a “Special Case”. Total time taken from arriving at the Mukdahan Boundary Post to finishing all formalities and driving out to the Thai-Lao Friendship Bridge is about 2+ hours. All in all, a very pleasant experience and no money exchanged hands anywhere during the process.
    4. Drive to the toll way and paid 50THB fees for using the bridge. This is where everything changed to right-hand drive.

    Entering Laos:

    1. First I parked my car on the right side before entering the custom. (Everything changed to right hand side in Laos)
    2. Bring my passport and get a stamped at the immigration. I was told to pay 60THB. It was with a receipt but no amount was printed on it.
    3. I found a new device “Lao Custom D53 Declaration System” which required every car owner to declare their vehicle before entering Laos. I entered my vehicle information, driver information and declaration information. Surprisingly there is an option to select “Malaysia” in the system. I even see “Singapore” too. The device printed a piece of sticker with my car information on it.
      Laos Custom D53 Declaration Car Permit Sticker
    4. I bring this sticker and walked to a booth to pay 65,000 Lao Kip. 50,000 Lao Kip is for the car import permit, 15,000 Lao Kip is for the D53 Sticker. I do not have Lao Kip with me so I was told to pay 160 Thai Baht. Lao Kip has inflated seriously over these years and the rate was 10,000 Lao Kip for 20 Thai Baht at that time.
    5. While I thought everything was done and I am ready to go, I was told to meet an officer for an interview and approval. The immigration officer asked whether I had the “car passport” book with me. Every Thai and Laos vehicle has a purple/yellow “Car Passport”, the custom will stamp an “in date” and “out date” when you enter and leave their country. I tried to explain Malaysian car do not have that. The officer couldn’t understand the car registration certificate from Malaysia which is printed only in Malay. They couldn’t or have no idea where to stamp the enter date.
    6. After a long discussion with the officer, I showed him a copy of “Simplified Customs Declaration Form”. I do not want to show this to him because the original one has been returned to Mukdahan custom when I left Thailand. I do not want any further misunderstanding. The officer then read the paper and asked me why there is no stamp on the paper proving you have left Thailand legally. Again, more explanation is needed as expected.
    7. In the end, the helpful officer enter my car details into their system according to the Customs Declaration Form as they are written in Thai. Lao and Thai are extremely similar languages, the way both of these languages written is just slightly different, just like using a different “font type”. The Lao officer is able to read and understand. However, he keeps asking the “Re-export Date” written in the “Simplified Customs Declaration Form”. I was given 45 days to use my car in Thailand when I entered from Sadao border. It has only 5 days left when I reached Laos border. The officer read a few times and tell me that I have to leave Laos in 5 days. I tried to explain to him this was a photocopy, I have returned the original to the custom in Mukdahan. I will be given a new one when I back to Thailand. The entire conversation was done with my limited Thai and super limited Lao.
    8. The officer then questioned me again, where are you going? how long are you going to stay in Laos? Which border are you going to use when you leave Laos? Again, I answered all his question politely with my super limited Lao mixed Thai mixed English language. He then granted me a 30-day entry into Laos with my Malaysian car by putting a stamp on the copy of “Simplified Customs Declaration Form” I brought along. Lao people are extremely friendly and helpful. I can feel this from the moment I stepped into this country. Do unto others as you would have them do unto you.

    All in all, an excellent border crossing into Laos using a Malaysian car. Below is the video I made during Mukdahan Savannakhet Thai-Lao Friendship Bridge No 2 border crossing experience. If you have any questions to ask me, please go to this video and leave a message via Youtube. My Youtube channel is CD Chai, I will try my best to answer all your questions as much as I can.

    I don’t know what will happened when I reach the border between Laos and Vietnam. Perhaps Malaysia JPJ should issue a “Car Passport” for all motorist who would like to drive abroad? Last but not least, I very much enjoyed being able to drive my JDM car to and around Laos. I am still in Laos while writing this article. I do made a lot of videos about the experience of driving in Laos, the petrol station, the fuel price, and the road condition in this country. Hope this article was helpful and encourage everyone who “wish to” but “not-sure” to drive a Malaysian car or Singaporean car to Laos. Let’s hope to see more Malaysian cars in Laos again. Perhaps we can form a group and drive into Laos together some time in the future!

  • 2022 All-New Honda HR-V e:HEV Hybrid Is Now Available in Thailand

    This is the latest, newest 2022 All-New Honda HR-V e:HEV hybrid model. I am really surprised to find out that this model is not available in certain countries yet, including Malaysia, Taiwan, and others. On the other hand, this car is selling good in the land of smile, Thailand. This photo is taken in the 2022 Bangkok Motor Show and you can see how popular this car is by looking at the visitors around it.

    We have recently received the information from Honda Taiwan, the only available variant in the Taiwanese market is 1.5 NA version. This means you can’t buy the HR-V e:HEV hybrid model in “Bao Dao” island. While in Thailand, this 1.5 litre engine and two electric motors powered e:HEV model is available at 1.079 million Thai baht, which is around $32,050 USD. What you get from the 32 grand price tag is a hybrid systems that develops 131 PS and 253 Nm of torque. Check out this video for more information of this 2022 Honda HR-V e:HEV hybrid.

  • 2022 Honda Civic e:HEV RS is Launched in Thailand International Motor Show

    The 2022 Honda Civic e:HEV RS is finally launched at the 43rd Bangkok International Motor Show. Honda Thailand is saying the selling price for the brand new Civic e:HEV RS will be around somewhere around 1,270,000 baht, it is about 300,000 baht more expensive than the cheapest fuel model.

    This time, Honda powers the Civic e:HEV RS with a direct-injected 2.0 litre naturally-aspirated Atkinson-cycle four-cylinder engine, together with 2 electric motors and a compact Power Control Unit, it is expected to produce a total power of 215hp or more.

    The interior of the 2022 Honda Civic e:HEV offers rear air vents and a 60:40 split-folding rear seat. This time, Honda makes the wheelbase 35mm longer to 2735mm compared to the previous generation. A newly designed rear seat make full use of the extra wheelbase length. A 10.25-inch digital instrument display, a Qi wireless charger and a smart key card are standard features for this car in Thailand market. For a close-up and detail review, check this video!

  • Gymkhana Round 3

    Gymkhana
    The Ultra racing Gymkhana Challenge Series Round 3 has just finished. It was the last Gymkhana event for 2014 and also the last race for 2014 after the Sepang International Circuit TimeToAttack. The venue was held at Speedway Plus Circuit USJ Subang Jaya Plus R&R. Race were separated into two main categories which are Precision Gymkhana and Open Gymkhana. Racers who joined Precision Gymkhana are not allowed to drift, skid, or make a turn with handbrake. On the other hand, drifting, handbraking, and skidding are allowed for Open Gymkhana. (more…)